ThrottleStop 9.5 Download | Texpot

ThrottleStop offers a variety of options that can be used to bypass CPU throttling and also provide a monitoring panel that shows the current status of each series on your CPU.

Some laptops use clock modulation and amplifier reductions to reduce your computer’s performance and power consumption. This is done deliberately to allow your laptop to run cooler or to run your laptop on an AC adapter that is not strong enough to fully operate your laptop and at the same time recharge its battery.

When using the ThrottleStop, monitor the power consumption on the wall with a Kill-a-Watt meter or similar device to ensure that you do not exceed the power capabilities of your AC adapter. Avoiding these throttling programs using ThrottleStop is at your own risk and may cause permanent damage to your power adapter or both systems, which are not covered by your warranty.

Advertising

What a novelty

9.5:

• Alter Lake desktop and mobile support added.
• Improved performance when using Windows Defender real-time protection.
• Disable and lock Turbo Power Limits box replaced with MMIO lock box.
• Added the ability to synchronize MSR and MMIO power limits.
• Improved SpeedStep and Speed ​​Shift compatibility with Windows.
• FIVR and TPL window themes have been updated, adding support for larger logos up to 240×138.
• Turbo limits and integrated turbo groups in the FIVR window.
• Added functionality for K-series CPUs to increase the voltage to 800 MHz for better low voltage stability.
• The risk of a BSOD loop is reduced if the voltage is too low.
• Added automatic activation of the powercut function when restarting from standby.
• Running the program is also disabled after the profile change feature for enhanced security.
• Older Core 2 Duo automatic dual IDA mode.

9.4.6 Beta:

• Disable and lock Turbo Power Limits box replaced with MMIO lock box.
• Updated FIVR and TPL window themes and recommended adding support for larger logos up to 240×138.
• Linked turbo limits and turbo groups in the FIVR window.
• Added functionality to increase CPU voltage to 800MHz for better low voltage stability.
• Improved SpeedStep and Speed ​​Shift compatibility with Windows.
• Reduces the risk of BSOD loop if the voltage is too low.
• Added automatic activation of the powercut function when restarting from standby.
• Old-fashioned Core 2 Duo automatic dual IDA.

9.4.3 Beta:

• Alter Lake desktop and mobile support added.

9.4.2 Beta:

• Added the ability to synchronize MSR and MMIO power limits.
• Disabled log folder dialog.
• Disables the run program after the profile conversion process.

9.4 Fixed:

• Disable MMIO feature for standard FIVR – 11th Gen CPUs.
• Separate report of MSR and MMIO power limits included.
• Added function to disable all C levels above C1.
• Added access to the ring down pin parameter.
• Limit Reasons for Skylake X Enabled.
• The driver has been updated for improved security.
• List of standard e-projects for languages ​​other than English.
• Replacing system tracking timers used.