Toyota Yaris Hybrid with Discharged Battery: Jump Start

Here’s what to do with a dead Toyota Yaris hybrid battery: Skip the startup tips

The Toyota Yaris hybrid with low battery This is a difficulty that affects all hybrid cars that are broken. If you find yourself in the same situation, we will explain to you now How to start a car in an emergency Avoid frequent mistakes in connecting battery cables to start the jump. Start the Toyota Yaris hybrid using jump tracks This is a very quick fix, but still useful to check, and whether you need to recharge the dead battery or replace it. Let’s see How to solve If your Toyota Yaris hybrid has low battery and different procedures to suit production year.

Toyota Yaris Hybrid: How to start the engine with cables

With Dead battery of Toyota Yaris hybrid, Power recovery system and auxiliary battery charging are also not available. The quickest solution is definitely to contact the roadside help, they will restart the car with a booster (attention, you can use it A 12V starter). If you have them, you can Use jump start cables Solve the problem with the help of another rescue car. The basic thing is to connect the cables properly, in this regard the Toyota signs may vary greatly depending on the version. Let’s take some examples.

Toyota launches Yaris Hybrid 2020 with low battery

When both cars are running before connecting, follow the steps below:

– Connect the positive pole (+) to the discharged battery with the red cable;

– Connect the positive pole (+) to the auxiliary vehicle battery;

– Connect the negative pole (-) to the auxiliary vehicle battery with black cable;

– Connect the positive pole (-) to the contact point shown in the figure below (do not connect directly to the negative of the battery);

Start the engine of the recovered car first, then disconnect the cables following the recovery and reverse procedure.

Starter Toyota Yaris Hybrid 2011-2019 with low battery

If the battery is low Toyota Yaris Ibrida 2011-2019, The positions of the contact points are different. Compared to the previous practice:

– Open the fuse box Next to the battery And with red cable connection Positive contact point Yaris with a flat battery (if removed, remove from red cap);

– Connect the positive pole (+) to the auxiliary vehicle battery;

– Connect the negative pole (-) to the auxiliary vehicle battery with black cable;

– Connect the positive pole with (-) The floor is shown in the image below (Do not connect directly to the negative of the battery);

It is always important to consult to avoid making mistakes Car Guide Pigeon Connection points are indicated Depending on the version. The video below explains how and why Do not connect the poles of the modern battery directly.