FRITZ! Box 4040 and FRITZ! In addition to the updates for the Box 7430, FRITZ! Box Manufacturer AVM, FRITZ! FRITZ for OS 7.27! Repeater has released a major update for the 2400. Update, Fritz! Fritz with repeater and mesh! Improves the automatic layout of the LAN connection between the box. In addition, the guide for setting up and changing access types has been redesigned and improved. There are also further improvements and changes, which can be found below. Fritz! Update for OS 7.27 German and Fritz! International and A / CH versions of Repeater 2400 are available for download now, Fritz! The box can be started with a single click via the user interface. Repeaters, Powerline or Fritz! All users are welcome to see if there are any updates to other products like Phone! AVM recommends checking the mesh view of the box. These updates are FRITZ! The box will also be displayed on the start page. More information about this update can be found below or at AVM.
Download -> Download to FRITZ! OS 7.27 FRITZ! Repeater 2400
With each update, AVM improves security, so it is recommended that every user do the update. FRITZ! Update FRITZ for OS 7.27! Repeater 2400 is now FRITZ! Available via Box user interface and downloaded from AVM. FRITZ! Open the box user interface -> Enter the fritz.box in the web browser and login -> Click on Help -> Update -> Start the update by clicking New FRITZ! Search for OS And the new FRITZ for FRITZ! Follow the instructions to get the OS! Repeater 2400.
FRITZ! Update for OS 7.27 is now available for download from AVM:
FRITZ! The update to OS 7.27 includes the following new features and improvements:
- Automatic setup of LAN connection from Fritz! Repeater for Fritz! Box updated with mesh.
- Redesigned guides for setting up and changing the access type (WLAN bridge / LAN bridge).
FRITZ! Further improvements and changes with OS 7.27
- Improvement: Improved system stability.
- Improvement: Improved WLAN stability.
- Improvement: Redesigned guides (WLAN bridge / LAN bridge) for setting up and changing access types.
- Improvement: FRITZ after pressing a button (WPS)! The time it takes to establish a connection with the box is significantly reduced.
- Improvement: News for WLAN has been updated under “System / Events”.
- Improvement: Improved the detection of multiple parallel WPS functions.
- Improvement: Edited DFS standby time messages under “System / Events”.
- Improvement: Naming WLAN guest access (SSID, default) depending on language choice.
- Improvement: Improved the stability of WLAN guest access.
- Fix: Vulnerabilities in the handling of incoming fragmented packets and integrated MPDUs (A-MPDUs) (“Fragattack”).
- Fix: With encrypted WiFi, the WPS functionality for WiFi guest access does not work reliably.
- Fix: In some cases the 5 GHz connection was not initially installed after connecting via WPS.
- OK: Fritz! Data transfer is interrupted for seconds when the repeater switches from 5 to 2.4 GHz if it is unfavorable.
- Fixed: Fixed reduced maximum performance rate when used with current Apple iOS and MacOS devices.
- Fix: The setup guide for setting up the WLAN bridge is incomplete.
- Fix: The last page of the setup wizard will show the WiFi network key even if the encrypted network is configured.
- Fix: When parallel running WPS logs are detected, they are not reliably stopped.
- Fix: The number of messages in “System / Events” was very low in some areas.
- Fix: Fritz for a non-enabled repeater for mesh! Box Invalid reference for password acceptance.
- Fix: If network settings are switched back and forth between different settings, the changes are not applied.
- Fixed: “Support” page can no longer be called directly.
- Fix: Speed display for LAN connections is incorrect.
- Fix: Accidental display of LAN connection systems.
- Fixed: Multiple requests for password assignment.
- OK: Last FRITZ! Incorrect time specification when displaying OS update.
- Fix: On rare occasions the 5 GHz band had multiple radar standby times.
- OK: In rare cases, Fritz! 5 GHz connection lost with box.
- Fixed: Problems allocating channels when changing the WLAN standard from “11a + n” to “11n + ac”.
- Fixed: Incorrect event under “System / Events” with WPS while waiting for DFS.
Every new FRITZ! With the OS update, AVM FRITZ! Box and FRITZ! It also updates the security functions of repeaters, so it is recommended to do the update for all devices.
Similar posts
Note: Use a web browser with HTML5 support, for example, current versions of Chrome, Edge or Firefox to use new functions.
Beatrice Ashford is a contributor at Nintendo-power.com, covering a wide range of topics including news, politics, business, technology, sport, entertainment, and lifestyle. She focuses on delivering clear, balanced reporting and useful information that helps readers stay informed about current events and emerging developments. Her work highlights stories that matter to everyday audiences, with an emphasis on accuracy, relevance, and accessible journalism that keeps readers connected to the issues shaping the world around them.